Dwyer DCT1000 User Manual download pdf (Page 2)

6-1/4

[158.75]

6-7/8

[174.62]

1-13/16

[46.04]

1/16

[1.59]

2-3/4

[69.85]

8-1/4

[209.55]

8-3/4

[222.25]

Figure 1 – Dimensional Specifications for the DCT1000

(shown with optional module DCP100A)

SPECIFICATIONS

Pressure Ranges: 10˝ w.c. or 20˝ w.c.

Temperature Limits: -40 to 140°F (-40 to 60°C).

Pressure Limit: 10 psi (68.95 kPa).

Pressure Limit (differential): 10 psi (68.95 kPa).

Accuracy: ±1.5% F.S. @ 73°F (22.8°C).

Output Signal: 4-20 mA.

Alarm Contacts: 1.5A inductive load, 3A resistive load @ 30 VAC

or 40 VDC.

Process Connections: Two barbed connections for use with 1/8˝

(3.18 mm) or 3/16˝ (4.76 mm) I.D. tubing.

Weight: 5.5 oz (155.9 g).

1-11/16

[42.86]

1/2

[12.70]

1-13/16

[46.04]

[25.40]

2-7/16

[61.91]

The DCP100A or DCP200A pressure modules are designed exclu-

sively for use with the Dwyer DCT1000 Dust Collector Timer

Controller boards for on-demand cleaning requirements. These

series of modules are available in 10˝ w.c. [2.49 kPa] or 20˝ w.c.

[4.98 kPa] ranges, which allow for differential process pressure

measurement as indicated on the display of the master controller.

An isolated 4-20 mA readout channel is provided for remote pres-

sure display. The 4-20 mA output may be wired either for use with

an external power supply and indicator or using the isolated on-

board 24 volt power supply to power the loop.

E-97:E-97 7/15/09 8:35 AM Page 2

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Dwyer DCT1000 User Manual Page 2

Comments to this Manuals

Related products and manuals for Sensors Dwyer DCT1000