Dwyer UFC User Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
8: Specification
50
TRANSDUCER SETS
Standard: Temperature Range -4°F to +275°F (-20°C to +135°C).
'A-ST' (standard) 0.5 to 4.5 inches (13 to 115 mm) pipe OD (2 MHz).
'B-ST' (standard) 2 to 79 inches (50 to 2000 mm) pipe OD (1 MHz).
Protection: IP54.
Optional: 'D' 59 to 197 inch (1500 to 5000 mm) pipe OD (0.5 MHz), with an operating temperature range of
-4°F to +176°F (-20°C to +80°C).
LANGUAGES
Standard Supported Languages: English, French, German, Italian, Spanish, Portuguese, Russian, Norwegian, Dutch, Swedish.
DATA LOGGER
Data Logged: All measurement parameters and flow readings, and both Totalized values.
Log Capacity: The internal SD card can store more than 4 years of data at the fastest logging rate.
Time Stamping: All data points are date and time stamped.
Number of Sites: 1 non-editable site plus 1 editable site.
Logging Interval: User programmable, 5 seconds to 1 hour.
Logged Data Transfer: Logged data can be transferred to a USB memory stick.
OUTPUTS
Current Output:
No. Channels
Format:
Resolution:
Error Currents:
Isolation:
Maximum Load:
1
4 to 20 mA, 0 to 20 mA, 0 to 16 mA.
0.1% of full scale.
Any between 0 to 26 mA.
1000 V Opto-isolated from unit.
620 Ohms.
Pulse Output TTL:
Number Available:
Isolation:
Pulse Repetition Rate:
Pulse Width:
Max Current:
Max Voltage:
1 – Opto-isolated MOSFET relay.
1500 V opto isolated from unit.
User programmable from 1 to 250 pps.
User programmable from 2 ms to 500 ms.
500 mA.
48V.
Alarms:
Number of Channels Available:
Isolation:
Relay Contact Mode:
Alarm Functions:
Frequency output:
Max Current:
Max Voltage:
2 off opto-isolated MOSFET relay.
1500 V opto isolated from unit.
N/O when switching condition is False.
Closed when switching condition is True.
The two relays can be configured to operate when:
a predefined
MINimum or MAXimum flow rate is exceeded.
a specified
VOLume is measured.
a signal Error condition occurs.
manual alarm test.
pulse frequency.
Maximum 200 Hz.
500 mA.
48V.
Page view 53
1 2 ... 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments